Heavy duty lathes

BARDAP Hydraulics has a fully equipped workshop to carry out repairs, overhauls and testing of hydraulic components including pumps, motors, cylinders, control valves, accumulators, gear boxes, etc.

CL-120 630 x 3000mm CENTRE LATHE (415V)

Features:

• Taper-turning attachment fitted to saddle
• Triple bearings supporting headstock spindle
• Adjustable taper roller bearings providing spindle accuracy
• Precision V-beds and headstock gears are all hardened and ground
• Hydraulic forward and reversing clutch mechanism with auto braking system
• Overload protection on drive motor and coolant system
• Universal enclosed gearbox incorporating metric and imperial thread capabilities
• X and Z axes rapid traverse selection lever incorporated on the saddle @ 4.0m/min
• 500mm wide induction hardened heavy duty cast iron bed
• Removable gap bed allowing work piece to swing up to 800mm
• Powered longitudinal and cross feeds
• Metric calibrated dials
• Coolant system with flexible hose enabling operator to manipulate flow direction
• Lubrication pump on saddle oiling slides
• Oil sight glass for head stock and gearbox and apron
• Slide-out swarf trays accessible from rear of machine
• Low voltage halogen work light
• Rack and pinion mechanism assists tail stock movement
• D1-11 camlock spindle for quick chuck removal
• Adjustable levelling pads
• 18 spindle speeds 8.5-800 rpm
• Large 108mm spindle bore
• 11.25kW / 15HP 415V main motor
• 380mm 3-jaw chuck with reversing jaws
• 500mm 4-jaw chuck
• 650mm faceplate
• 20-130mm Follow Rest
• 20-170mm Steady Rest
• 160-350mm Extra Steady Rest
• Fixed and travelling steadies with roller fingers
• Thread chasing dial
• Taper turning attachment

Machine suitability

• Large to medium size hydraulic cylinder barrels
• Large to medium size hydraulic cylinder rods
• Large to medium size hydraulic cylinder pistons and glands
• Large to medium drive shafts up to 3 metre long x 600 diameter

Back to top

CD62500B (500 x 2000mm) HIGH SPEED CENTRE LATHE (415V)

Features:

• Taper-turning attachment fitted to saddle
• Triple bearings supporting headstock spindle
• Adjustable taper roller bearings providing spindle accuracy
• Precision V-beds and headstock gears are all hardened and ground
• Multiple discs forward and reversing clutch system
• Overload protection on drive motor and coolant system
• Universal enclosed gearbox incorporating metric and imperial thread capabilities
• Foot operated spindle brake with safety cut-out switch
• X and Z axes rapid traverse selection lever incorporated on the saddle @ 4.5m/min
• 360mm wide induction hardened heavy duty cast iron bed
• Removable gap bed allowing work piece to swing up to 710mm
• Slide out swarf trays accessible from rear of machine
• Two speed tail stock selector
• Powered longitudinal and cross feeds
• Calibrated dials incorporating metric graduations
• Coolant system with flexible hose enabling operator to manipulate flow direction
• Oil sight glass for head stock and gearbox and apron
• Low voltage halogen work light
• Camlock spindle for quick chuck removal
• 12 spindle speeds 9-1600rpm
• Large 102mm spindle bore
• 7.5kW / 10HP 415V main motor

Machine suitability

• Medium size hydraulic cylinder barrels
• Medium size hydraulic cylinder rods
• Medium size hydraulic cylinder pistons and glands
• Drive shafts up to 2 metre long x 300 diameter

Back to top