|
NISSENS HP & HPC Oil Coolers
(High Performance & High Performance Circulation)
Nissens' standard high performance
oil coolers are all designed with a view of optimum cooling of hydraulic and
lubricating oil in all kind of installations.
The HPC Series is fitted with a 3
x 400 V electric motor, while the HP series is fitted with a 12/24 VDC, 3x400
VAC electric motor or a hydraulic motor.
All designs are based on wind
tunnel test to ensure maximum, utilising of a fan.
The oil coolers are brazed aluminum coolers with a very high brazing, a
special turbulator and a very efficient fin with a large face area.
Back to Top
Application field: stationary
installations – cooling of either hydraulic or lubricating oil.
Advantages
- Compact oil cooler
- Considerable strength and high working pressure
- High cooling performance
- Low pressure loss
- Low noise level
- CE – marking of the coolers
- Very short delivery time
- High flexibility
Back to
Top
Application filed: recommended for
mobile installations – for cooling of either hydraulic or lubricating oil.
Advantages
- Compact oil cooler
- Considerable strength and high working pressure
- High cooling performance
- Low pressure loss
- Low noise level
- CE – marking of the coolers
- Very short delivery time
- High flexibility
Back to
Top
Application field: mobile and
stationary installations – for cooling of either hydraulic or lubricating oil
Advantages
- Compact oil cooler
- Considerable strength and high working pressure
- High cooling performance
- 6 different standard motor sizes
- Low pressure loss
- Low noise level
- CE – marking of the coolers
- Very short delivery time
- High Flexibility
Back to
Top
Application field:
hydraulic systems with heavy peak pressures, recommended for lubrication
oil
Advantages
- Compact oil cooler
- Considerable strength and high working pressure
- High cooling performance
- High-performing pump with integrated pressure-bypass
- Suitable for a high oil viscosity
- Low Pressure loss
- Low noise level
- CE – marking of the coolers
- Very short delivery time
- High flexibility
Back to Top
The thermo-switch is used for
regulating the oil temperature in installations in which oil coolers with
electric-driven fans are installed.
The thermo-switch is available
with the following set-point temperatures:
38, 47, 60 and 70 degree Celsius
Max. working temperature 120
degree Celsius
Safety class
IP 65
Thread
1 inch
Back to Top
The ideal solution to keep a
minimum oil temperature, irrespective of the ambient temperature.
The thermo-bypass is available
with the following closing temperatures:
38, 45, 70 and 87 degree Celsius
Max. oil flow
67 /min.
Connections 1 inch
Max. working temperature 120 degree Celsius
Back to Top
Disclaimer / Copyright ©, Bardap
Hydraulics, 2008 | All Rights Reserved.
Designed by
SMA
Hussain.
|
