BARDAP Hydraulics has a fully equipped workshop to carry out repairs, overhauls and testing of hydraulic components including pumps,
motors, cylinders, control valves, accumulators, gear boxes, etc.
CL-120 630 x 3000mm CENTRE LATHE (415V)
Features:
- Taper-turning attachment fitted to saddle
- Triple bearings supporting headstock spindle
- Adjustable taper roller bearings providing spindle accuracy
- Precision V-beds and headstock gears are all hardened and ground
- Hydraulic forward and reversing clutch mechanism with auto braking system
- Overload protection on drive motor and coolant system
- Universal enclosed gearbox incorporating metric and imperial thread capabilities
- X and Z axes rapid traverse selection lever incorporated on the saddle @ 4.0m/min
- 500mm wide induction hardened heavy duty cast iron bed
- Removable gap bed allowing work piece to swing up to 800mm
- Powered longitudinal and cross feeds
- Metric calibrated dials
- Coolant system with flexible hose enabling operator to manipulate flow direction
- Lubrication pump on saddle oiling slides
- Oil sight glass for head stock and gearbox and apron
- Slide-out swarf trays accessible from rear of machine
- Low voltage halogen work light
- Rack and pinion mechanism assists tail stock movement
- D1-11 camlock spindle for quick chuck removal
- Adjustable levelling pads
- 18 spindle speeds 8.5-800 rpm
- Large 108mm spindle bore
- 11.25kW / 15HP 415V main motor
- 380mm 3-jaw chuck with reversing jaws
- 500mm 4-jaw chuck
- 650mm faceplate
- 20-130mm Follow Rest
- 20-170mm Steady Rest
- 160-350mm Extra Steady Rest
- Fixed and travelling steadies with roller fingers
- Thread chasing dial
- Taper turning attachment
Machine suitability
- Large to medium size hydraulic cylinder barrels
- Large to medium size hydraulic cylinder rods
- Large to medium size hydraulic cylinder pistons and glands
- Large to medium drive shafts up to 3 metre long x 600 diameter
Back to top
CD62500B (500 x 2000mm) HIGH SPEED CENTRE LATHE (415V)
Features:
- Taper-turning attachment fitted to saddle
- Triple bearings supporting headstock spindle
- Adjustable taper roller bearings providing spindle accuracy
- Precision V-beds and headstock gears are all hardened and ground
- Multiple discs forward and reversing clutch system
- Overload protection on drive motor and coolant system
- Universal enclosed gearbox incorporating metric and imperial thread capabilities
- Foot operated spindle brake with safety cut-out switch
- X and Z axes rapid traverse selection lever incorporated on the saddle @ 4.5m/min
- 360mm wide induction hardened heavy duty cast iron bed
- Removable gap bed allowing work piece to swing up to 710mm
- Slide out swarf trays accessible from rear of machine
- Two speed tail stock selector
- Powered longitudinal and cross feeds
- Calibrated dials incorporating metric graduations
- Coolant system with flexible hose enabling operator to manipulate flow direction
- Oil sight glass for head stock and gearbox and apron
- Low voltage halogen work light
- Camlock spindle for quick chuck removal
- 12 spindle speeds 9-1600rpm
- Large 102mm spindle bore
- 7.5kW / 10HP 415V main motor
Machine suitability
- Medium size hydraulic cylinder barrels
- Medium size hydraulic cylinder rods
- Medium size hydraulic cylinder pistons and glands
- Drive shafts up to 2 metre long x 300 diameter
Back to top